gggrids-redone

cat_fine_square

The 'HH/A' series offers a very high transmission value with the additional support of a hexagonal or circular pattern. They offer an alternative to the standard hexagonal mesh grids for use in applications where it is important that the maximum area of specimen is available for viewing in the microscope. 

MESH SPECS
Mesh
(lines/inch)
Pitch
um
Bar Width
um
Hole Width
um
G200HS 200 125 12 113
G300HS 300 83 10 73
G400HS 400 62 8 54
G600HSS 600 42 6 36
G1000HS 1000 25 6 19
G1500HS 1500 16.5 6 10.5
G2000HS 2000 12.5 6 6.5
GVHS 200-400 125-62 10-10 115-52
  150-300 165-83 10-10 115-73

 

AVAILABILITY
Cu Cu/Pd Ni Au 2.3mm No/vial
(Gold:Other)
G200HS No No 50:100
G300HS No No 50:100
G400HS No No 50:100
G600HSS No No 50:100
G1000HS No No 25:25
G1500HS No No 15:15
G2000HS No No 10:10
GVHS No No 50:100

 

CENTRE/RIM
Rim Width
(mm)
Centre Mark
(See Info)
Rim Mark
(See Info)
G200HS 0.5P None No
G300HS 0.5P None No
G400HS 0.5P None No
G600HSS 0.5 None
G1000HS 0.5 None No
G1500HS 0.5 None
G2000HS 0.5 None
GVHS 0.5 None No

 

Notes


(1) HSS denotes an extra thin bar width.

(2) VHS - 4 quadrants of varying mesh density, for determining the optimum support and transmission for a particular application.


(See Specs Sheet Image)