gggrids-redone

cat_parrallel

14 types offer a wide choice of specimen support. Parallel bar grids are particularly useful for obtaining information from sequential ribbons of sections.

Overall thickness variation :
G50P/PB : 27 microns, +/- 5 microns
G400P/PB : 12microns, +/- 2 microns

MESH SPECS
Mesh
(lines/inch)
Pitch
um
Bar Width
um
Hole Width
um
G50P 50 500 84 416
G75P 75 340 70 270
G100P 100 250 65 185
G150P 150 165 50 115
G200P 200 125 45 80
G300P 300 83 35 48
G400P 400 62 40 22
       
G50PB 50 500 84 416
G75PB 75 340 70 270
G100PB 100 250 65 185
G150PB 150 165 50 115
G200PB 200 125 45 80
G300PB 300 83 35 48
G400PB 400 62 40 22

 

AVAILABILITY
Cu Cu/Pd Ni Au 2.3mm No/vial
(Gold:Other)
G50P No 50:100
G75P No 50:100
G100P No 50:100
G150P No 50:100
G200P No 50:100
G300P No 50:100
G400P No 50:100
     
G50PB No 50:100
G75PB No 50:100
G100PB 50:100
G150PB No 50:100
G200PB 50:100
G300PB No 50:100
G400PB No 50:100

 

CENTRE/RIM
Rim Width
(mm)
Centre Mark
(See Info)
Rim Mark
(See Info)
G50P 0.225 None
G75P 0.225 None
G100P 0.225 None No
G150P 0.225 None
G200P 0.225 None No
G300P 0.225 None
G400P 0.225 None
     
G50PB 0.225 None
G75PB 0.225 None
G100PB 0.225 Reverse arrow No
G150PB 0.225 None
G200PB 0.225 Reverse arrow No
G300PB 0.225 None
G400PB 0.225 None

 

 

Notes

 

(1) PB denotes the grid has a single bar passing through the centre of the grid, at 90 degrees to the parallel bars.

 

(See Specs Sheet Image)