gggrids-redone

cat_hex

As an alternative to square mesh, hexagonal mesh grids offer a higher support factor for a given mesh repeat distance.

Overall thickness variation :

G50HEX : 25 microns, +/- 5 microns
G400HEX : 10 microns, +/- 2 microns

MESH SPECS
Mesh
(lines/inch)
Pitch
um
Bar Width
um
Hole Width
um
G50HEX 50 500 70 430
G75HEX 75 340 50 290
G100HEX 100 250 35 215
G150HEX 150 165 35 130
G200HEX 200 125 25 100
G300HEX 300 83 25 58
G400HEX 400 62 25 37

 

AVAILABILITY
Cu Cu/Pd Ni Au 2.3mm No/vial
(Gold:Other)
G50HEX No 50:100
G75HEX No 50:100
G100HEX No 50:100
G150HEX No 50:100
G200HEX 50:100
G300HEX No 50:100
G400HEX No 50:100

 

CENTRE/RIM
Rim Width
(mm)
Centre Mark
(See Info)
Rim Mark
(See Info)
G50HEX 0.225 None
G75HEX 0.225 None
G100HEX 0.225 None No
G150HEX 0.225 None
G200HEX 0.225 None No
G300HEX 0.225 None
G400HEX 0.225 None

 

Notes

 

(1) Hole width is measured from edge to opposite edge of the hexagonal aperture.

(See Specs Sheet Image)