Comprising of 13 types
with mesh repeat values ranging from 50 lines/inch to 600 lines/inch.
The overall thickness of the grid depends on the mesh repeat, and
as a general guide the lower the mesh repeat, the thicker the grid.
The variation in thickness and bar/hole width in a population of 100
grids (1 vial) again increases with a lower mesh repeat.
Overall thickness variation :
• G50 : 25 microns, +/-
5 microns
•
G600TT : 6 microns, +/- 2 microns
MESH
SPECS
|
Mesh
(lines/inch) |
Pitch
um |
Bar
Width
um
|
Hole
Width
um
|
| G50 |
50 |
500 |
80 |
420 |
| G75 |
75 |
340 |
55 |
285 |
| G100 |
100 |
250 |
45 |
205 |
| G150 |
150 |
165 |
40 |
125 |
| G175 |
175 |
145 |
37 |
108 |
| G200 |
200 |
125 |
35 |
90 |
| G200TH |
200 |
125 |
40 |
85 |
| G200TT |
200 |
125 |
35-25 |
95 |
| G200T |
200 |
125 |
40 |
85 |
| G250 |
250 |
100 |
30 |
70 |
| G300 |
300 |
83 |
25 |
58 |
| G400 |
400 |
62 |
25 |
37 |
| G600TT |
600 |
42 |
16-10 |
30 |
|
|
AVAILA-
BILITY
|
Cu |
GCu |
Cu/Pd |
Ni
|
GNi
|
Au |
Mo |
2.3mm |
No/vial
(Gold:Other) |
| G50 |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G75 |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G100 |
• |
• |
• |
• |
• |
• |
• |
• |
50:100 |
| G150 |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G175 |
• |
• |
• |
• |
• |
• |
No |
No |
50:100 |
| G200 |
• |
• |
• |
• |
• |
• |
• |
• |
50:100 |
| G200TH |
• |
• |
• |
• |
• |
• |
No |
No |
50:100 |
| G200TT |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G200T |
• |
• |
• |
• |
• |
• |
No |
No |
50:100 |
| G250 |
• |
• |
• |
• |
• |
• |
No |
No |
50:100 |
| G300 |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G400 |
• |
• |
• |
• |
• |
• |
No |
• |
50:100 |
| G600TT |
• |
• |
• |
• |
• |
• |
No |
No |
50:100 |
|
|
CENTRE/RIM
|
Rim
Width
(mm) |
Centre
Mark
(See Info) |
Rim
Mark
(See Info) |
| G50 |
0.225 |
None |
No |
| G75 |
0.225 |
Asymmetrical
|
No |
| G100 |
0.225 |
Asymmetrical |
• |
| G150 |
0.225 |
Asymmetrical |
• |
| G175 |
0.225 |
Asymmetrical |
• |
| G200 |
0.225 |
Asymmetrical |
• |
| G200TH |
0.225 |
Asymmetrical |
• |
| G200TT |
0.225 |
Asymmetrical |
• |
| G200T |
N/A |
Asymmetrical |
• |
| G250 |
0.225 |
Asymmetrical |
• |
| G300 |
0.225 |
Asymmetrical |
• |
| G400 |
0.25 |
Asymmetrical |
• |
| G600TT |
0.225 |
Reverse
arrow |
No |
|
|
|
Notes
|
|
(1) TH - Overall thickness
increases as compared to the standard G200.
(2) TT - Varying bar widths in a 'thick thin' pattern.
(3) T - A 'handle' grid.
(4) The central hole is for manufacturing purposes
only and may or may not appear.
|
|
(See Specs Sheet Image)
|
|
